Hunt's Alumawood Pergola Arbor Lattice

Picture - 01 Enlarge Image	Picture - 02 Enlarge Image	Picture - 03 Enlarge Image
Picture - 04 Enlarge Image	Picture - 05 Enlarge Image	Picture - 06 Enlarge Image
Picture - 07 Enlarge Image	Picture - 08 Enlarge Image	Picture - 09 Enlarge Image
Picture - 10 Enlarge Image	Picture - 11 Enlarge Image	Picture - 12 Enlarge Image

Hunt's Job Details:

• ORDERED: January 2003
• SIZE: 12' projection x 42' length
• DESIGN LOAD: 10 Pound Live Load and 90 Mile Per Hour Wind Factor
  Note: ICBO ER2621-P Report used for engineering.

• ATTACHMENT: Freestanding (Posts have been poured into Concrete Footings)
• COLOR: White
• QUANTITY OF POSTS: 6
• APPROXIMATE MATERIALS COST: $10,000
  

Hunt's Job Specifications:

• ROUND COLUMNS : 6 - 8” Wide x 8’-0” Tall
• STRUCTURAL POST INSERTS: .041” Steel Thick x 3” x 3” Wide x 10 ’-0” Tall.
  Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
• COLUMN TRIM: 2”Wide x 6 ½” Tall with End Cap.
  Installed on top of Column to aesthetically tie the beam and Column Top Cap together.
• ALUMAWOOD™ RAFTERS: .024” Thick x 2” Wide x 6½” Tall
• END CAP STYLE (Rafter Tails and Beam): Mitered
• ALUMAWOOD™ LATTICE TUBES: .019” Thick x 1½” Wide x 1½” Tall
• LATTICE CAP STYLE: Beveled
• ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
• STRUCTURAL "C" BEAM INSERT: Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall.
  "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
• MISC. SUPPLIES: Brackets, Hardware and Touch Up Paint.
• ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish in White
• DESIGN LOAD: 10 Pounds Per Square Foot Live Load
• WIND FACTOR: 90 mph Max
• ENGINEERING REPORT: ICBO ER2621-P