Knudson's Alumawood Pergola Arbor Lattice

Picture - 01 Enlarge Image	Picture - 02 Enlarge Image	Picture - 03 Enlarge Image
Picture - 04 Enlarge Image	Picture - 05 Enlarge Image

Knudson's Job Details:

• ORDERED: August 2004
• SIZE: 11'-6" projection x 25' length
• LOCATION: Firth, Idaho
• DESIGN LOAD: 30 Pound Live Load and 90 Mile Per Hour Wind Factor
  Note: Site Specific engineering done for this job locally by customer's Engineer.

• ATTACHMENT: Attached to Eaves and Wood Deck
• COLOR: White
• QUANTITY OF POSTS: 4
• APPROXIMATE COST: $3,700
  

Knudson's Job Specifications:

• ALUMAWOOD™ POSTS: 4 - 024" Thick x 3” x 3” Wide x 8’-0” Tall
• STRUCTURAL POST INSERTS: .041” Steel Thick x 3” x 3” Wide x 8’-0” Tall.
  Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
• ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8’-8” Tall (2 per post).
  Sideplates come with 2" Rigid Foam Insert.
• ALUMAWOOD™ RAFTERS: .024” Thick x 2” Wide x 6½” Tall
• END CAP STYLE (Rafter Tails and Beam): Mitered
• ALUMAWOOD™ LATTICE TUBES: .019” Thick x 1½” Wide x 1½” Tall
• LATTICE CAP STYLE: Beveled
• ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
• STRUCTURAL "C" BEAM INSERT: Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall.
  "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
• MISC. SUPPLIES: Brackets, Hardware and Touch Up Paint.
• ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish in White