|
ARBOR LATTICE COVER INSTALLATION
These awnings are
something the average Do
It
Yourself Home Owner can install; the system will usually only take
a
weekend
with
basic
tools.
Do It Yourselfer Installation Instructions will be provided and Technical
Assistants
is
also
available via phone or email;
if
you
have
anything
that
you
are
unsure
about
one
of
our
representatives
will
be
happy
to
give
you
any
advice
you
need
or
walk
you
through
step by step.
Tools
Needed:
Here is a list of tools the we recommend to help make your install go smooth; you may not need
all of the tools and may find you can use an alternative tool to do the
job - depending on your installation.
If you do not have some of these tools you can purchase them at any Home
Center (Home Depot, Lowe's, etc..), most of the items can be purchased for only
for a few dollars. The more expensive power tools can be rented from a
Rental Yard usually
only costing a few dollars to rent for the weekend.
1.
Variable Speed Electric
drill
with
screwdriver
bits
and
a
1/4"
(Magnetic)
hex
bit.
2.
3/8"
Drill
bit.
3.
Hack
saw, Miter Saw, Chop Saw, Jig Saw or Skill Saw
with a fine
toothed
blade
for
metal.
4.
Caulking
gun.
5.
Measuring
tape.
6.
Screwdriver.
7.
Hammer.
8.
Metal
snips.
9.
Socket
(Magnetic
Tip)
and
shank.
10.
Crescent
wrench.
11.
Level.
12.
Carpenter's
square.
13.
2
Ladders.
14.
Heavy
duty
pencil.
15.
1/2"
Masonry
bit.
16. Saw Horses
Note: Tool list is for wall attached systems, if you have a special
installation such as an eave, roof top or freestanding system other tools may be
required.
Roof Top Ledger Installation
View more...
|
