Biras Alumawood Patio Cover

• ORDERED: November 2006
• SIZE: 16' projection x 14' length
• LOCATION: Missouri
• DESIGN LOAD: 20 Pound SNOW Load and 90 Mile Per Hour Wind Factor
  Note: ICBO ER2621-P Report does not spec deck attachments, engineering it is based on concrete attachment.

• ATTACHMENT: Attached to Fascia Board and Wood Deck
• COLOR: White
• ENDS: Corbel End Caps
• QUANTITY OF POSTS: 2
• APPROXIMATE COST: $3,400 Delivered to Missouri
  Note this price does not reflect a standard kit, this is a reinforced kit designed for a 20lb Snow Load for Missouri that has been reinforced with a Steel "C"-Beam and Steel Post Inserts which allow a larger post spacing so the customer can have only two posts instead of three.
  A Kit designed for a 10lb Live Load would be approx. $2,500. The 20lb Snow load required .036" pans instead of .024", Steel Post Inserts and Steel 12 gauge "C"-Beam Insert that a kit designed for a 10lb Live Load would not require. Note: The Steel C-Beam and Steel Post Inserts cannot be seen once installed.

 

Biras Job Details and Specifications:

• ALUMAWOOD™ POSTS: 2 - 024" Thick x 3” x 3” Wide x 8 ’-0” Tall
• STRUCTURAL POST INSERTS: .048”Steel Thick x 3” x 3” Wide x 8 ’-0” Tall.
  Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
• ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8 ’-8” Tall (2 per post).
  Sideplates come with 2" Rigid Foam Insert.
• ALUMAWOOD™ FLAT ROOF PANELS: .036” Thick x 2½” Tall x 6” wide
• ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
• ALUMAWOOD™ DOWNSPOUT: 2 Drop Outlet, 4 Elbows and 2" Liter Pipe
• ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
• STRUCTURAL "C" BEAM INSERT:
  Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall x 20’ Length cut to fit on site, "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
  
• ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails.
• MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Wall Hanger, Gutter Plugs and Touch Up Paint.
• ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish in White
• END CAP STYLE (False Rafter Tails and Beam): Corbel Ends
• DESIGN LOAD: 20 Pounds Per Square Foot Live Load / Snow Load Max
• WIND FACTOR: 90 mph Max
• ENGINEERING REPORT: ICBO ER2621-P