Prizer's Job Details:
- ORDERED: February 2009
- SIZE: 8' projection x 42' length
15'-6" of the 42' has a 3' projection, the patio cover wraps around the wall while maintaining a straight line at the end of the projection.
- LOCATION: Newhall, CA
- DESIGN LOAD: 10 Pound Live Load and 90 Mile Per Hour Wind Factor
Note: Customer had Engineering done by a local Licensed Engineer to obtain a Permit for his Patio Cover. Product Engineering does not allow the attachment to a Retaining Wall.
- ATTACHMENT: Attached to Eaves and Retaining Wall.
The customer opted to attach to his retaining wall, this cover does not meet the product engineering requirements held by the IBC Engineering Report. Customer had Engineering done locally that allowed for attachment to the Retaining Wall.
- COLOR: Desert Sand
- QUANTITY OF POSTS: 6
- APPROXIMATE MATERIALS COST: $4,000
Note this price does not reflect a standard kit, this kit is reinforced with a Steel "C"-Beam and which allow larger beam span.
Note: The Steel C-Beam Insert cannot be seen once installed.
Prizer's Job Specifications:
- ALUMAWOOD™ POSTS: Qty. of 6 - 024" Thick x 3” x 3” Wide x 8 ’-0” Tall
- ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 10’-8” Tall (2 per post).
Sideplates come with 2" Rigid Foam Insert.
- ALUMAWOOD™ FLAT ROOF PANELS: .018” Thick x 2½” Tall x 6” wide
- ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
- ALUMAWOOD™ DOWNSPOUT: 2 Downspout Kits (Drop Outlet, Elbows and 2" Liter Pipe)
- ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
- STRUCTURAL "C" BEAM INSERT:
Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall Length, "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
- ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails.
- MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Wall Hanger, Gutter Plugs and Touch Up Paint.
- ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish in Desert Sand
- END CAP STYLE (False Rafter Tails and Beam): Mitered
- DESIGN LOAD: 10 Pounds Per Square Foot Live Load
- WIND FACTOR: 90 mph Max
- ENGINEERING: Customers own Engineering that he had done locally.
|
