Try-Tech.com
Toll Free 866-337-2381
Photo Galleries
<<<---Back to Main Photo Gallery Page - Installation Photos - Parts Photos
Also see Combination Patio and Lattice Cover Photos

 
Trenary Customer Patio Cover Project
PICTURE - MT-PIC-01
Enlarge ImageAlumawood Patio Cover
PICTURE - MT-PIC-02
Enlarge ImageAlumawood Patio Cover
PICTURE - MT-PIC-03
Enlarge ImageAlumawood Patio Cover

Mark Trenary's Alumawood Patio Cover

  • ORDERED: April 2005
  • SIZE: 12' projection x 14' length
  • LOCATION: Montana
  • DESIGN LOAD: 30 Pound SNOW Load and 90 Mile Per Hour Wind Factor
  • ATTACHMENT: Attached to Wall and Slab
  • COLOR: White
  • ENDS: Mitered End Caps
  • QUANTITY OF POSTS: 2
  • APPROXIMATE COST: $3,200 Delivered to Montana
    Note this price does not reflect a standard kit, this is a kit designed for a 30lb Snow Load for Montana that has been reinforced with a Steel "C"-Beam and Steel Post Inserts which allow a larger post spacing so the customer can have only two posts instead of four.
    A Kit designed for a 10lb Live Load would be approx. $2,100. The 30lb Snow load required .032" pans instead of .018", Steel Post Inserts and Steel 12 gauge "C"-Beam Insert that a kit designed for a 10lb Live Load would not require. Note: The Steel C-Beam and Steel Post Inserts cannot be seen once installed.

 

Trenary's Job Details and Specifications:

  • ALUMAWOOD™ POSTS: 024" Thick x 3” x 3” Wide x 10’-0” Tall
  • STRUCTURAL POST INSERTS: .048”Steel Thick x 3” x 3” Wide x 10’-0” Tall.
    Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
  • ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 10’-8” Tall (2 per post).
    Sideplates come with 2" Rigid Foam Insert.
  • ALUMAWOOD™ FLAT ROOF PANELS: .032” Thick x 2½” Tall x 6” wide
  • ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
  • ALUMAWOOD™ DOWNSPOUT: 1 Drop Outlet, 2 Elbows and 2" Liter Pipe
  • ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
  • STRUCTURAL "C" BEAM INSERT:
    Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall x 20’ Length cut to fit on site, "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
  • ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails.
  • MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Wall Hanger, Gutter Plugs and Touch Up Paint.
  • ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish in White
  • END CAP STYLE (False Rafter Tails and Beam): Mitered
  • DESIGN LOAD: 30 Pounds Per Square Foot Live Load / Snow Load Max
  • WIND FACTOR: 90 mph Max
  • ENGINEERING REPORT: ICBO ER2621-P

 

Copyright Logo