Try-Tech.com
Toll Free 866-337-2381

DIY ALUMAWOOD™ NEPORT PATIO COVER KITS

Everything needed to install is included with the Patio Cover Kit.
All Materials such as Roof Pans / Panels, Gutter, Front Fascia, Side Fascia's, Wall Hanger, Wall Flashing, Downspout(s), Posts and Post Side Plates, Support Beam, Brackets, Caulking and Miscellaneous Hardware is all included as part of the kit.

To receive a quick free quote on a patio cover call us or fill out a free quote request; for design help and getting started give us a call or start online by reading our information on designing your own patio cover kit (click here).

 

The following parts lists are general lists of the most popular patio kits:

BASIC KITS

Single Span Attached to Wall and Slab.

  • ALUMAWOOD™ POSTS: 024" Thick x 3” x 3” Wide x 8’-0”, 10’-0” or 12’-0” Tall
  • ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8’-8”, 10’-8” or 12’-8” Tall (2 per post).
    Sideplates come with 2" Rigid Foam Insert.
  • ALUMAWOOD™ FLAT ROOF PANELS: .018", .024”, .032” or .036” Thick x 2½” Tall x 6” wide
  • ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
  • ALUMAWOOD™ DOWNSPOUT/S: Drop Outlet, Elbows and 2" Liter Pipe
  • ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
  • ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails
  • MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Hanger Trim @ Side Fascia, C-Rollform Wall Hanger, Gutter Plugs, Touch Up Paint, Splices (if required)
  • ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish available in White, Desert Sand, Mojave Tan, Adobe, Sonora Beige or Latte
  • END CAP STYLE (False Rafter Tails and Beam): Mitered, Flat Beveled, Corbel or Scalloped
  • DESIGN LOADINGS: Based on Live Load (LL) or Ground Snow Load (GSL) lbs per sq. ft.
    IBC 2006 / ICC Engineering Design (IBC meets California Building Code)
    10 lbs LL per sq. ft. -  Available up to 20’ projection
    20 lbs LL per sq. ft. - Available up to 15’ projection
    30 lbs GSL per sq. ft.  / 25.2 lbs Design Load - Available up to 11’ projection
    ICBO ER2621-P Engineering Design
    10 lbs LL per sq. ft. -  Available up to 20’ projection
    20 lbs LL per sq. ft. - Available up to 15’ projection
    30 lbs LL per sq. ft. - Available up to 11’ projection
    40 lbs LL per sq. ft. - Available up to 11’ projection
    60 lbs LL per sq. ft. - Available up to 11’ projection
  • Projection = Distance out from house – available in 1” increments in projection shown.
    Length = Distance along house - available in 6” increments up to any length.
  • WIND FACTOR: 90 mph Max
  • ENGINEERING REPORT: IBC / ICC 2006 or ICBO ER2621-P
    Verify with your Local Building Department what Engineering Report is required.
    Top

REINFORCED KITS

Single Span Attached to Wall and Concrete Footings with Steel Structural Post and Beam Inserts.

  • ALUMAWOOD™ POSTS: 024" Thick x 3” x 3” Wide x 8’-0”, 10’-0” or 12’-0” Tall
  • STRUCTURAL POST INSERTS: .048”Steel Thick x 3” x 3” Wide x 8’-0”, 10’-0” or 12’-0” Tall. Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
  • ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8’-8”, 10’-8” or 12’-8” Tall (2 per post).
    Sideplates come with 2" Rigid Foam Insert.
  • ALUMAWOOD™ FLAT ROOF PANELS: .018", .024”, .032” or .036” Thick x 2½” Tall x 6” wide
  • ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
  • ALUMAWOOD™ DOWNSPOUT/S: Drop Outlet, Elbows and 2" Liter Pipe
  • ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
  • STRUCTURAL "C" BEAM INSERT:
    Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall x 20’, 24’ or 30’ Lengths. "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
    Note: 30' Length Beams cannot be shipped and available for pickup only.
  • ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails
  • MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Hanger Trim @ Side Fascia, C-Rollform Wall Hanger, Gutter Plugs, Touch Up Paint, Splices (if required)
  • ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish available in White, Desert Sand, Mojave Tan, Adobe, Sonora Beige or Latte
  • END CAP STYLE (False Rafter Tails and Beam): Mitered, Flat Beveled, Corbel or Scalloped
  • DESIGN LOADINGS: Based on Live Load (LL) or Ground Snow Load (GSL) lbs per sq. ft.
    IBC 2006 / ICC Engineering Design (IBC meets California Building Code)
    10 lbs LL per sq. ft. – Available up to 20’ projection
    20 lbs LL per sq. ft. – Available up to 20’ projection
    30 lbs GSL per sq. ft.  / 25.2 lbs Design Load – Available up to 18’ projection
    40 lbs GSL per sq. ft.  / 33.6 lbs Design Load – Available up to 16’ projection
    60 lbs GSL per sq. ft.  / 50.4 lbs Design Load - Available: Up to 14’ projection
    ICBO ER2621-P Engineering Design
    10 lbs LL per sq. ft. -  Available up to 20’ projection
    20 lbs LL per sq. ft. - Available up to 15’ projection
    30 lbs LL per sq. ft. - Available up to 11’ projection
    40 lbs LL per sq. ft. - Available up to 11’ projection
    60 lbs LL per sq. ft. - Available up to 11’ projection
    Projection = Distance out from house – available in 1” increments in projection shown.
    Length = Distance along house - available in 6” increments up to any length.
  • WIND FACTOR: 90 mph Max
  • ENGINEERING REPORT: IBC / ICC 2006 or ICBO ER2621-P
    Verify with your Local Building Department what Engineering Report is required.
    Top

FREESTANDING KITS

Posts are required to be poured into Concrete Footings with Steel Structural Post Inserts.
Recommended for Advanced Do It Yourselfers or Contractors.

  • ALUMAWOOD™ POST SLEEVES: 024" Thick x 3” x 3” Wide x 8’-0”, 10’-0” or 12’-0” Tall
  • STRUCTURAL POST INSERTS: .048”Steel Thick x 3” x 3” Wide x 10’-0”, 12’-0” or 14’-0” Tall. Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
    Note: Max Height available above concrete footings is 12’-0” with most designs; some restrictions apply.
  • ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8’-8”, 10’-8” or 12’-8” Tall (2 per post).
    Sideplates come with 2" Rigid Foam Insert.
  • ALUMAWOOD™ FLAT ROOF PANELS: .018", .024”, .032” or .036” Thick x 2½” Tall x 6” wide
  • ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
  • ALUMAWOOD™ DOWNSPOUT/S: Drop Outlet, Elbows and 2" Liter Pipe
  • ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
  • ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails
  • MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Hanger Trim @ Side Fascia, C-Rollform Wall Hanger, Gutter Plugs, Touch Up Paint, Splices (if required)
  • ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish available in White, Desert Sand, Mojave Tan, Adobe, Sonora Beige or Latte
  • END CAP STYLE (False Rafter Tails and Beam): Mitered, Flat Beveled, Corbel or Scalloped
    Note: False Rafter Tails are on both length sides of Structure.
  • DESIGN LOADINGS: Based on Live Load (LL) lbs per sq. ft.
    IBC 2006 / ICC Engineering Design (IBC meets California Building Code)
    10 lbs LL per sq. ft. – Available up to 14’ projection (distance of roof panels including gutters)
    ICBO ER2621-P Engineering Design
    10 lbs LL per sq. ft. -  Available up to 15’ projection
  • Projection = Distance out from house – available in 1” increments in projection shown.
    Length = Distance along house - available in 6” increments up to any length.
  • WIND FACTOR: 90 mph Max
  • ENGINEERING REPORT: IBC / ICC 2006 or ICBO ER2621-P
    Verify with your Local Building Department what Engineering Report is required.
    Top

REINFORCED FREESTANDING KITS

Posts are required to be poured into Concrete Footings with Steel Structural Post and Beam Inserts.
Recommended for Advanced Do It Yourselfers or Contractors.

    • ALUMAWOOD™ POSTS: 024" Thick x 3” x 3” Wide x 8’-0”, 10’-0” or 12’-0” Tall
    • STRUCTURAL POST INSERTS: .048”Steel Thick x 3” x 3” Wide x 10’-0”, 12’-0” or 14’-0” Tall. Post Insert is covered by Alumawood™ Post, the Post insert is not visible once cover is installed.
      Note: Max Height available above concrete footings is 12’-0” with most designs; some restrictions apply.
    • ALUMAWOOD™ POST SIDEPLATES: 2” x 6 ½” Wide x 8’-8”, 10’-8” or 12’-8” Tall (2 per post).
      Sideplates come with 2" Rigid Foam Insert.
    • ALUMAWOOD™ FLAT ROOF PANELS: .018", .024”, .032” or .036” Thick x 2½” Tall x 6” wide
    • ALUMAWOOD™ GUTTER: Rollform Gutter .036” Thick x 3” Wide x 6½” Tall
    • ALUMAWOOD™ DOWNSPOUT/S: Drop Outlet, Elbows and 2" Liter Pipe
    • ALUMAWOOD™ BOX BEAM: .042” Thick x 3” Wide x 8” Tall Box Beam
    • STRUCTURAL "C" BEAM INSERT:
      Steel "C" Type 12 gauge Red Oxide Primed 2.88” Wide x 7.88” Tall x 20’, 24’ or 30’ Lengths. "C" Beam Insert is covered by Alumawood™ Box Beam, the "C" Beam insert is not visible once cover is installed.
      Note: 30' Length Beams cannot be shipped and available for pickup only.
    • ALUMAWOOD™ PERIMETER TRIM: 2" x 6½” Side Fascia’s, 2" x 6½” Front Fascia and 2" x 6½” x 12" False Rafter Tails
    • MISC. SUPPLIES: Brackets, Hardware, Caulking, Flashing, C-Rollform Hanger Trim @ Side Fascia, C-Rollform Wall Hanger, Gutter Plugs, Touch Up Paint, Splices (if required)
    • ALUMA-SHIELD℠ PAINT: Silicon polyester paint finish available in White, Desert Sand, Mojave Tan, Adobe, Sonora Beige or Latte
    • END CAP STYLE (False Rafter Tails and Beam): Mitered, Flat Beveled, Corbel or Scalloped
      Note: False Rafter Tails are on both length sides of Structure.
    • DESIGN LOADINGS: Based on Live Load (LL) lbs per sq. ft.
      IBC 2006 / ICC Engineering Design (IBC meets California Building Code)
      10 lbs LL per sq. ft. – Available up to 20’ projection
      20 lbs LL per sq. ft. – Available up to 20’ projection
      30 lbs GSL per sq. ft.  / 25.2 lbs Design Load – Available up to 20’ projection
      40 lbs GSL per sq. ft.  / 33.6 lbs Design Load – Available up to 19’ projection
      60 lbs GSL per sq. ft.  / 50.4 lbs Design Load - Available: Up to 18’ projection
      ICBO ER2621-P Engineering Design
      10 lbs LL per sq. ft. -  Available up to 20’ projection
      20 lbs LL per sq. ft. - Available up to 15’ projection
      30 lbs LL per sq. ft. - Available up to 11’ projection
      40 lbs LL per sq. ft. - Available up to 11’ projection
      60 lbs LL per sq. ft. - Available up to 11’ projection
    • Projection = Distance out from house – available in 1” increments in projection shown.
      Length = Distance along house - available in 6” increments up to any length.
    • WIND FACTOR: 90 mph Max
    • ENGINEERING REPORT: IBC / ICC 2006 or ICBO ER2621-P
      Verify with your Local Building Department what Engineering Report is required.
      Top
Copyright Logo