Aluminum Window Awnings
Window Awning Materials:
All of the Window Awning frame parts are white except for the cotter pins. Window awning pans are white on one side and colors shown on the selection chart on the other side. All parts are made from aluminum Rollform coil stock. Screws are cadmium plated.
Materials Included with Awning Kit:
1. Awning (flex) pans
2. Appropriate # of 1" return arms
3. (2) adjustable brackets & screws for each return arm
4. (1) unitizing stringer for each return arm
5. (3) Cotter pins for each return arm
6. (2) Screws for each adjustable bracket
 |
||||||||||||
|
||||||||||||
Manufacturing Process: All orders are made to order, there are no standard kits that the Manufacturer stocks, every order is considered custom. After your order has been placed your awning goes into the production line, aluminum sheets are used for making most parts of the awning. Sheets are cut to length and then formed by large machines that press them into shape. Once all the parts for the awning have been manufactured the awning is carefully packaged using 500lb test cardboard. From this point it is ready for shipment. Due to this process the manufacturing / production time takes approximately 7 to 9 days from the date of order. |
Stringers, Valance Brackets, 3/4" Tubes and Off Set Sleeves included.
Quantity of each part determined by Window Awning Length Ordered.
Awning Length |
Stringers |
Valance Brackets |
3/4" Tubes |
Off Set Sleeves |
1' - 5'-6" |
2 |
2 |
2 |
2 |
5'-7" - 11' |
3 |
3 |
2 |
2 |
If you would like additional Stringers, Valance Brackets, 3/4" Tubes or Off Set Sleeves for your Aluminum Window Awning it will be an additional cost. Sorry, our website does not have the option for adding additional parts to the Window Awning Kits; please call to place your order if you need additional parts with your Window Awning Kit.
