What Comes with Kit: Note: Tubing not included with Kit, Tubing required is 1" EMT Electrical Conduit. Kits Include:   High quality steel joint fittings zinc coated with eyebolts   Heavy Duty Polyethylene Cover   Virgin Rubber Ball Bungees   Clip Clamps   Zip Ties   Cut List for required Tubing   Installation Instructions

Part:	Picture	Description
Steel Zinc Coated Fittings		Fittings are made from High Grade Steel, Mig Welded Joints and a Zinc finish which is gold in color.  Each individual insert on the fitting has a welded on nut and eyebolt to secure the pipe.
Heavy Duty Polyethylene Cover		Silver: Sun Blocker: 14 X 14 MESH COUNT, 12 MIL THICKNESS, BLACK YARN, BLACK AND SILVER COATED, CORNER PLASTIC REINFORCED, ULTRA VIOLET 3% TREATED, 100% SUN BLOCK, WATER PROOF, MILDEW, AND ROT RESISTANCE.
Virgin Rubber Ball Bungees		Ball Bungees are an elastic cord connected to plastic ball, the elastic cord is made from Virgin Rubber to keep a consistent stretch.  Ball Bungees attach by putting the loop of Bungee through the grommet in the tarp around the EMT Pipe and then attaching the loop over the ball.
Grip Clips		Plastic Grip Clips are designed for the 1" EMT, they snap over the Polyethylene Cover onto the 1" EMT to hold the cover in place.
Cable Ties		Cable Ties are used for attaching the pipe to the door flap.  The door flap requires a pipe attached to the bottom to keep it closed.

Kit Options

All our firewood rack kits come with our steel zinc coated fittings as used on our heavy duty 1" canopies. The woodrack kits come in 2 standard lengths 4' or 8'. (You can adjust the 8' rack kit  from 5'  to 8' in length)  and adjust the width of either kit. Standard firewood rack kit widths will work from 14" to 24" firewood. 

Warning: These are not designed as a jungle gym or climbing structure. The Firewood Rack is designed onl y to store wood for your wood stove or fireplace. For your safety make sure rack is on a hard stable surface before loading your firewood.